Dishwasher Repair


In a day and age when people are so busy and there are so many different things going on, anything that we can do to save time is welcomed. The household dishwasher saves a lot of time for people at the end of their busy day. The problems happen when the dishwasher is not working, and they have to do the dishes by hand.

All appliances have an average lifespan and for dishwashers, it is only 10 years, on average. It is an appliance that takes a lot of abuse and thus has a shorter lifespan than many other appliances. This makes it a machine that requires regular maintenance and repairs as well.

You always have the option to call in a professional to fix your dishwasher if you don’t feel comfortable or confident enough to do it yourself. But, many times, people can fix many of the issues that they may be having with their dishwasher on their own. Here are some troubleshooting tips for you to help you handle the problem yourself.

Continue reading for common dishwasher problems:


There are a few different things that can cause a dishwasher to leak water including the door seals, water inlet valve, and the pump. A leaky dishwasher can be a big problem because of all the water that a dishwasher needs to do its’ job. This type of problem may need to be handled by a professional, but many handy homeowners can handle it on their own.


To deal with a problem like this, you will want to check the most obvious things first. Check to make sure that the machine is plugged in and that all of the circuit breakers have not been tripped. Once you have ruled these out, you will want to check the door latch switches, electronic controls, motor relays, timers, and thermal fuses. Because there are a number of things that can cause this, it can be difficult to narrow down what the exact cause may be.


In order to fix a loud dishwasher, you first need to determine the type of noise that it is. It will make it easier to determine what the problem is if you identify the type of noise that it is. Check the motor bushings, washer arm bearing, and the pump housings first. More often than not, these are the parts that are most likely to cause the problem.


Without detergent, the dishes are not going to get cleaned and the dishwasher is not going to be able to do its’ job properly. When this happens, you are going to need to check the wax motor, the bi-metal release, and the timer of the machine. One of these is likely to be the problem that you will need to address.


When the door is shut on the dishwasher, it signals it to turn on and begin the wash cycle. When there is a problem with the door not properly closing and sealing, it is commonly the door latch kit. Fixing the door latch kit is one of those repairs that can easily be handled on a do-it-yourself basis.


The process of drying the dishes can be affected by the heating element, high limit thermostats, and rinsing dispensers. The heating element should be the first thing to check and if there is no problem with this, the last two should be the next parts to check.


These are two separate problems that are each going to have different components that are going to contribute. If the dishwasher is not draining, the drain hose, timer, or the drain pump motor need to be investigated. If the machine won’t fill up, you will need to check the door switch, float switch, or the water inlet valve.

Many homeowners can handle repairs like these in around an hour. Just remember, there is no shame in calling in a professional if you don’t feel comfortable doing it yourself. The owner’s manual is a great resource to use when you are doing any repairs or maintenance on your dishwasher (or any appliance for that matter). Here are local companies we recommend:

Glyn’s Appliance Repair Service
Miami, FL
(305) 235-3893

South East Appliance Service
Aurora, CO
(303) 690-5417

AAA Appliance Repair
Los Angeles, CA
(323) 933-1588

Freezer Repair


In most cases, a freezer is combined with a refrigerator. The freezer is either on top of, below or to the side of the refrigerator. However, there are also standalone models referred to as chest freezers. You will often find a chest freezer in a basement or garage where it is used for long-term storage of food and liquids. There are also walk-in freezers in restaurants and other commercial properties.

The average freezer repair project is not too difficult. We find most freezer repair projects require no more than 15-20 minutes to complete with the right tools and process.  Also, freezers do not need much attention or care. This is because freezers tend to be a durable household appliance and can last as long as 10-15 years before problems start to occur. This is especially true of name brand freezers, including Haier, Danby, Amana and Maytag.

The list below features some problems that tend to occur on freezers once the appliance has reached 10 years of age or older. This post includes a brief overview of the problem as well as general guidelines and troubleshooting tips. You can find more in-depth tutorials throughout

Do not attempt any of the repairs below without the proper tools, safety gear and understanding. If you are not comfortable, do not proceed. Instead, call a local appliance repair company near you for assistance in fixing your broken freezer. We have provided a list of our recommendations at the bottom of this post.

Continue reading for our list of common freezer problems:


A common problem on residential freezers is the presence of too much frost in the interior of the appliance. This issue is unique to freezers but not too complicated to repair. In the event of frost buildup, inspect the door gasket as well as the defrost thermostat and defrost timer. Identify which of these parts is defective or causing the buildup and then remove and replace it from the freezer for successful repair.


A freezer will generate a small amount of noise during operation but nothing too loud or unpleasant. If loud noises start to emit from the appliance, it is an indication that something is wrong with the freezer that requires attention. “The first part to inspect is the evaporator fan motor. Then inspect the evaporator fan blade. These freezer parts can wear down over time or dull and will need to be replaced in order to put an end to the unpleasant noises coming from the machine,” according to Tom Senzel, owner of Appliance Repair Edison NJ.


Most household appliances are electrical. This means they need to be plugged in. Often times, the reason a freezer won’t turn on is because it is unplugged. Another common reason is that a circuit breaker tripped and needs to be turned on again. If neither of these issues are the cause of the problem, inspect start capacitor and the thermostat. You can troubleshoot both parts to determine which one needs replacement.


A freezer should stop and start running based on the temperature inside of it. You will hear a small hum from the freezer as it is running. If there is no pause in humming for an extended period of time, there is a chance the freezer is continuing to run for longer than it should. In this case, inspect the defrost timer, the defrost thermostat and the temperature control. In theory, a part on the freezer is no longer recording the correct temperature causing the machine to run longer than it is supposed to.


A residential freezer should be 0 degrees fahrenheit. The machine will start and stop running in order to settle at that temperature for the majority of the time. If a freezer is either too cold or too warm, there is an issue that needs immediate attention in order to protect the food or liquid inside. You should inspect the user control and temperature control as well as the thermostat. These three parts are the primary parts responsible for the temperature of the freezer. feels the repairs listed above can be completed by most amateur handymen and homeowners if done carefully with the correct tools. However, we do not recommend proceeding with a repair without the proper tools or comfort level. In this case, it is best to hire a professional appliance repair company trained in freezer repair. Here are some local companies we recommend:

L&W Appliance Repair
Corpus Christi, TX

Appliance Repair South Plainfield
Edison, NJ

Anaheim Appliance Repair
Anaheim, CA


Garbage Disposal Repair


A standard garbage disposal is not a complicated household appliance. There are very few parts necessary for a garbage disposal to operate in comparison to larger appliances, including dishwashers, refrigerators, etc. Therefore, garbage disposal repair is often low effort and requires no more than 15-30 minutes for the average homeowner or handyman.

That being said, not all homeowners are comfortable with DIY repair. In the event a problem is too complicated to fix on your own, recommends enlisting the services of a local appliance repair company in your neighborhood. This will ensure safe and successful results for the garbage disposal.

Below are some of the most common repairs for garbage disposals and food waste disposers. The list is applicable to all major brands and models. This includes Disposal Genie, Waste King, InSinkErator and Moen. Review the list and contact us with questions if need be:


If there is a burning smell coming from the drain in your kitchen sink, the odds are something is wrong with the garbage disposal and in need of repair. The source of the smell is likely the motor inside of the disposal unit. In the event the motor is no longer working, we recommend replacing the entire appliance. This is because the cost of purchasing and installing a new motor is similar to the cost of a brand new garbage disposal.


Garbage disposals run on electricity. This means if the appliance won’t turn on, the homeowner should first ensure the unit is plugged in. The second step is to inspect the home’s circuit breaker box in order to determine if a circuit breaker tripped and needs to be flipped on again. If neither of these issues are the problem, the next step is to review the stopper and starter switch to determine if it needs to be replaced. This is a relatively easy repair that can be completed in a relatively short time.


A garbage disposal can start to leak beneath the sink. Sometimes this can go unnoticed for some time unless the leak is large enough to create a dripping sound below. Once a leak is noticed, the homeowner should act fast in order to repair or replace the garbage disposal. “The first thing to look for when a garbage disposal is leaking is whether or not the seals and gaskets are worn or loose,” according to Vince Calvin, owner of Appliance Repair Baton Rouge LA.


A common error that can occur on residential garbage disposal units is intermediate starting and stopping. Like we mentioned above, issues related to a food waste disposer not turning on or not staying on are often due to a problem with the starter and stopper switch. You can replace the switch and likely correct the issue. If the problem persists, then it is best to consult with a local appliance repair service or schedule a service visit for them to identify the reason the garbage disposal will no longer stay on like it should.


A garbage disposal is a loud appliance. The blades and motors create a grinding, rumbling sound during operation. This means it could be difficult to notice or identify an unusual sound. But if an unfamiliar or loud noise comes from the appliance, you will want to inspect the condition of the blades. Be sure the appliance is turned off and unplugged before interacting with the blades. There is also the possibility silverware or something non combustible fell into the drain and simply needs to be removed. You or an appliance repairman can replace dull blades.


The moment the garbage enters the drain and disposal unit, it should not return. The garbage will be grinded and then flushed down the drain. If garbage comes back up, there is something wrong with the food waste disposer. The reason this problem occurs is due to a broken splash guard. The good news is that while this sounds like a serious repair, it is actually quite easy to replace the splash guard and correct the issue. You can find a new splash guard at a hardware store or on an online appliance part store or retailer.

The repairs above can often be completed by a homeowner or handyman with little appliance repair experience. But do not proceed with a repair without the proper tools and confidence. It is better to hire a professional appliance repair company than to attempt and fail a repair that results in further damage to the appliance. Because of this, we have provided a list of some reputable appliance repair companies to hire for garbage disposal repair:

Ideal Appliance Parts
Baton Rouge, LA

A-Dave’s Appliance Repair Inc.
Joliet, IL

Conway Appliance Repair Inc.
Orlando, FL